Stone’s most popular model holds four 3/8” digits. The pliers is made of a strong, lightweight aluminum alloy. Has a positive ear release that lifts the needles to prevent scratches and blurred tattoos. Easy to change digits can’t be inserted upside down. Comes complete with the plier, a set of 3/8” digits 0-9, and a 3 oz. jar of black ink

American Livestock Supply, Inc. has taken great care in assembling this label information. But, due to the possibility of human error or manufacture label changes, American Livestock Supply, Inc. disclaims responsibility for use or misuse of this product. Before use, always read and follow the manufacturer's label on the physical product.

TATTOO OUTFIT WITH RELEASE Standard 3/8 : contains 1- tattoo pliers, 1- tattoo ink black (3.oz) and 3/8 numbers 0-9\n

Strong , lightweight aluminum alloy plier, Positive ear release lifts needles, prevents scratches and blurred tattoos. Easy change digits can’t be inserted upside down. INGREDIENTS:\n

DIRECTIONS: 1. Place the figures or letters which you wish to use to identify the animal into the slotted jaw of the marker, close the lock, and before punching the ear, try the marker in apiece of cardboard so as to assure yourself that the figures or letters are in the order desired. 2. Hold the animal closely enough to prevent violent movements of the head. Select a spot in the ear as near the center as possible and well back from the edge where skin is light in color and free from hair, being careful to avoid the ribs or cords. (placing the tattoo in one of these ribs usually means a poor tattoo as well as an excessive flow of blood). After selected spot has been thoroughly cleaned, insert the ear between the jaws of the marker with the figures or letters on the inside of the ear over the prepared spot. Close the jaws quickly and firmly and release quickly to avoid tearing. 3. After ear has been punctured, rub ink thoroughly over punctures with finger. Rub each puncture until well filled. In case of an excessive flow of blood, it is necessary to use more ink and rub longer.\n

PRECAUTION: 1. Clean inside of ear entirely free of grease, dirt, wax, with a cloth dampened with alcohol or a course dry cloth.\n
2. Clean tattoo digits free from dirt, hair, ect with alcohol and a wire brush (same may be used on tattoo plier) \n
3.\tAvoid hair, dark skin and cords/ribs in the ear. \n
4.\tBe sure that the pins of the tattoo set are driven deep into the surface of the ear. \n
5.\tUse plenty of ink. \nRub ink well into perforations after puncturing ear. The secret of the operation is to get ink below surface of the ear\n