This product is extremely toxic to fish. Do not contaminate water when cleaning equipment or
disposing of equipment washwater. Do not apply directly to water, or to areas where surface
water is present, or to intertidal areas below the mean high water mark. Drift and runoff from
treated areas may be hazardous to aquatic organisms in neighboring areas. Apply this product
only as specified on this label. When making applications, care should be used to avoid household
pets, particularly fish and reptile pets.
This product is highly toxic to bees exposed to direct treatment or residues on blooming crops
or weeds. Do not apply this product or allow it to drift to blooming crops or weeds if bees are
visiting the treatment area.
Physical and Chemical Hazards
Do not use this product in or on electrical equipment due to the possibility of shock hazard.
CONDITIONS OF SALE AND LIMITATION OF
WARRANTY AND LIABILITY
NOTICE:
Read the entire Directions for Use and Conditions of Sale and Limitation of
Warranty and Liability before buying or using this product. If the terms are not acceptable,
return the product at once, unopened, and the purchase price will be refunded.
The Directions for Use of this product must be followed carefully. It is impossible to eliminate all
risks inherently associated with the use of this product. Crop injury, ineffectiveness or other
unintended consequences may result because of such factors as manner of use or application,
weather or crop conditions, presence of other materials or other influencing factors in the use of
the product, which are beyond the control of Agripharm
® Products or Seller. To the extent
permitted by applicable law, Buyer and User agree to hold Agripharm
® Products and Seller
harmless for any claims relating to such factors.
Agripharm
® Products warrants that this product conforms to the chemical description on the
label and is reasonably fit for the purposes stated in the Directions for Use, when used in accordance
with directions under normal use conditions. To the extent permitted by applicable law:
(1) this warranty does not extend to the use of this product contrary to label instructions, or
under conditions not reasonably foreseeable to or beyond the control of Seller or Agripharm
®
Products, and (2) Buyer and User assume the risk of any such use. To the extent permitted by
applicable law, Agripharm
® Products MAKES NO WARRANTIES OF MERCHANTABILITY OR OF
FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY
EXCEPT AS WARRANTED BY THIS LABEL.
To the extent permitted by applicable law, in no event shall Agripharm
® Products be liable for
any incidental, consequential or special damages resulting from the use or handling of this
product.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE EXCLUSIVE REMEDY OF
THE USER OR BUYER, AND THE EXCLUSIVE LIABILITY OF AGRIPHARM
® PRODUCTS AND
SELLER FOR ANY AND ALL CLAIMS, LOSSES, INJURIES OR DAMAGES (INCLUDING CLAIMS
BASED ON BREACH OF WARRANTY, CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR
OTHERWISE) RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT, SHALL BE THE
RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR, AT THE ELECTION OF
AGRIPHARM
® PRODUCTS OR SELLER, THE REPLACEMENT OF THE PRODUCT.
Agripharm
® Products and Seller offer this product, and Buyer and User accept it, subject to the
foregoing Conditions of Sale and Limitation of Warranty and of Liability, which may not be
modified except by written agreement signed by a duly authorized representative of Agripharm
®
Products.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
IMPORTANT:
Not for use on plants being grown for sale or other commercial use, or for
commercial seed production, or for research purposes. For use on plants intended for aesthetic
purposes or climatic modification and being grown in interior plantscapes, ornamental gardens
or parks, or on lawns or grounds.
This product is restricted for use in the State of New York.
STORAGE AND DISPOSAL
Prohibitions
Do not contaminate water, food, or feed by storage or disposal. Open dumping is prohibited. Do
not reuse empty container.
Storage
Keep container closed when not in use. Do not store near food or feed. Shake well before use.
Protect from freezing. In case of spill or leak on floor or paved surfaces, soak up with sand, earth,
or synthetic absorbent. Remove to chemical waste storage area until proper disposal can be
made.
Pesticide Disposal
Pesticide wastes are toxic. Improper disposal of excess pesticide, spray mixture, or rinsate is a
violation of Federal law. If these wastes cannot be disposed of by use according to label instructions,
contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste
representative of the nearest EPA Regional Office for guidance.
Container Disposal
or by other procedures approved by state and local authorities.
GENERAL INFORMATION: STRUCTURAL AND PERIMETER
PEST CONTROL
For use as a general surface, crack and crevice, or spot treatment in, on, and around buildings
and structures and their immediate surroundings, and on modes of transport. Permitted areas of
use include, but are not limited to, aircraft (cargo and other non-cabin areas only), apartment
buildings, boiler rooms, buses, closets, correctional facilities, decks, entries, factories, fencing,
floor drains (that lead to sewers), food granaries, food grain mills, food manufacturing, processing
and serving establishments; furniture, garages, garbage rooms, greenhouses (non-commercial),
hospitals, hotels and motels, houses, industrial buildings, laboratories, livestock/poultry
housing, landscape vegetation, locker rooms, machine rooms, mausoleums, mobile homes, mop
closets, mulch, nursing homes, offices, patios, pet kennels, porches, railcars, restaurants, storage
rooms, schools, sewers (dry), stores, trailers, trees, trucks, utility passages, vessels, vestibules,
warehouses, wineries and yards.
For indoor applications, retreat at 21 day intervals or as necessary to maintain control.
Mixing Instructions
EXILE™ CS insecticide is intended for dilution with water for application using hand-held or
power-operated application equipment as a coarse spray for crack and crevice or spot and
general surface treatments. Application equipment that delivers low volume treatments, such
as the Micro-Injector
® or Actisol® applicator, may also be used to make crack and crevice or
spot and general surface treatments. Fill applicator tank with the desired volume of water and
add EXILE™ CS insecticide. Close and shake before use in order to ensure proper mixing.
Shake or reagitate applicator tank before use if application is interrupted. Mix only amount
of treatment volume as required. A general surface treatment of EXILE™ CS insecticide may
be applied by using a paintbrush or other porous applicator attached to a handle.
Tank Mixing
EXILE™ CS insecticide may be tank mixed with other currently registered pesticides unless
expressly prohibited by the product label. A small volume mixing test with the other products is
recommended to ensure compatibility. If mixed with sanitizers, EXILE™ CS insecticide should be
added to the tank first. If other chemicals are added to the applicator tank, EXILE™CS insecticide
should be added last. If mixed with EC formulations, use within 24 hrs. Fill tank to desired volume
and continue to agitate while making applications.
EXILE™ CS insecticide may be tank mixed with an Insect Growth Regulator (IGR) such as
Archer
® Insect Growth Regulator.
Observe all restrictions and precautions which appear on the labels of these
products.
Foam Applications
EXILE™CS insecticide may be converted to a foam and the foam used to treat structural voids
to control or prevent pests including ants, bees, termites (above ground only), wasps, or other
arthropods harboring in walls, under slabs, or in other void areas.
RATES FOR STRUCTURAL PESTS (HAND APPLICATION EQUIPMENT)
Pests Concentration of A.I. Dilution Rate
Ants 0.015–0.03% 0.015%:
Bedbugs (adult) 0.2 fl.oz.(6mL)/gal.
Bees of water
Beetles
Boxelder Bugs 0.03%:
Carpenter Bees 0.4 fl.oz.(12mL)/gal.
Carpet Beetles of water
Centipedes
Cigarette Beetles
Clover Mites
Cockroaches
1
Confused Flour Beetles
Crickets
Earwigs
Firebrats
Fleas
2
Flies
Lesser Grain Borers
Millipedes
Mosquitoes
Red Flour Beetles
Rice Weevils
Saw-toothed Grain Beetles
Silverfish
Pests Concentration of A.I. Dilution Rate
Sowbugs 0.015–0.03% 0.015%:
Spiders 0.2 fl.oz.(6mL)/gal. of water
Termites (above ground only)
Ticks 0.03%:
Wasps 0.4 fl.oz.(12mL)/gal.
of water
Cockroaches
1 0.06% 0.8 fl.oz.(24mL)/gal.
Crickets
6 of water
Flies
5*
Litter Beetles
3 (such as
Darkling, Hide, and Carrion)
Mosquitoes
4
Pillbugs
Scorpions
Spiders
6
Spider Mites
(Twospotted, Spruce)
Ticks
6
*
Not approved for use in California at the high rate.
1
For cockroaches, the recommended rate for maintenance treatments is 0.015% and for
clean-out treatments is 0.03%. For control of SEVERE infestations, use 0.06% rate.
2
For outdoor use only and use 0.03% rate.
3
For control of LIGHT beetle infestations, use 0.03% rate.
4
For residual control, use 0.06% rate.
5
Rates for flies may be increased to 0.06% when environmental conditions are severe
and/or populations are high.
6
For clean-out/severe infestations, use 0.06% rate.
SPECIFIC USE DIRECTIONS
Ants
Apply to any trails around doors and windows and other places where ants may be found. For
best results, locate and treat nests. Where ants are trailing inside, apply as a residual surface
treatment to active areas such as baseboards, corners, around pipes, in and behind cabinets,
behind and under refrigerators, sinks, furnaces and stoves, cracks and crevices. When combining
baits and residual surface insecticides, apply surface insecticides in cracks and crevices, along
baseboards, and infested surfaces and outside barrier treatments. Treatment of perimeter landscaping
can reduce honeydew-producing insects and limit this ant food source. Use baits in other
areas that are untreated by residual insecticides; also see
Outdoor Surfaces Use.
Cockroaches, Crickets, Earwigs, Firebrats, Silverfish, and Spiders
Apply as a coarse, low pressure spray to areas where these pests hide, such as baseboards, corners,
storage areas, closets, around water pipes, doors and windows, attics and eaves, cabinets,
behind and under refrigerators, furniture, sinks, furnaces and stoves, the underside of shelves,
drawers and similar areas. Pay particular attention to cracks and crevices; also see
Outdoor
Surfaces Use.
Bedbugs
Recommend cleaning of floors and surfaces by vacuuming. Apply as a coarse, low-pressure spray
to harborage areas including crevices, baseboards, loose plaster, behind bed frames and headboards,
beneath beds and furniture, and to bedsprings and bed frames. Do not apply to furniture
surfaces or mattresses where people will be laying or sitting. Infested bedding should not be
treated, but should be removed, placed in sealed plastic bags, and taken for laundering and
drying at high temperatures.
Bees, Flies, Mosquitoes, and Wasps
Apply directly to walls, ceilings, window screens, and other resting areas as a residual surface
treatment. May be used inside residential buildings as well as in and around carports, garages,
and storage sheds; also see
Outdoor Surfaces Use. Use caution when treating nests of stinging
insects as EXILE™CS insecticide does not provide instant knockdown. Protective equipment
for the applicator may be required. For best results, treat bee, wasp and hornet nests late in the
day when most insects will be present. Allow 2-3 days for colony to die and retreat if necessary.
For mosquito control, apply as a general structural perimeter spray to landscape plantings, turf,
and building foundations to control mosquitoes. Yards or other frequented areas enclosed by
landscaping can benefit from the creation of a mosquito barrier to reduce invading mosquitoes
by the treatment of perimeter vegetation. For best results, apply EXILE™ CS insecticide at
recommended rates in 2–5 gals. of water per 1,000 sq. ft. Higher volumes applied result in
better coverage and, as a rule, will improve control. Application to vegetation away from structures
may require additional certification, e.g. in turf or ornamental categories. Consult your state
regulatory agency for requirements.
Carpenter Bees
Apply coarse spray to thoroughly wet wood surfaces where bees have been previously active or
to provide protection against further damage. Apply early in the spring to prevent bees from
invading wood. When bees have infested wood, surface applications can help control embedded
larvae and bees that emerge from the wood. Applications can be made on a monthly basis to
maintain protection of treated areas.
Pantry Pests (i.e., Carpet beetle, Cigarette beetle, Confused flour beetle,
Lesser grain borer, Red flour beetle, Rice weevil, and Saw-toothed grain
beetle)
Apply to cupboards, shelving, and storage areas. Remove all utensils, uncovered foodstuffs (or any
having original package opened), and shelf paper before making application. Allow treated surfaces
to dry and cover shelves with clean paper before replacing any utensils, foodstuff, or other
items. Any foodstuff accidentally contaminated with treatment solution should be destroyed.
Boxelder Bugs, Centipedes, Millipedes, Pillbugs, and Sowbugs
Apply around doors and windows and other places where these pests may be found or where
they may enter premises. Treat baseboards, storage areas, and other locations. Apply barrier
treatments to prevent infestation as described below; also see
Outdoor Surfaces Use.
Fleas and Ticks
To control nuisance fleas and ticks (e.g. dog ticks) apply to kennels, yards, runs, and other areas
where pets may frequent. For best coverage to control ticks, apply using a coarse fan spray to
vegetation brush, branches, rock walls, and other areas near habitation where ticks may harbor
or frequent. Treat entire area rather than making spot treatments, and retreat as necessary to
maintain control. Do not apply to pasture or cropland, and do not allow animals and people
access to treated areas until the deposit has dried. Applications can be made on a monthly basis,
beginning in the spring and can continue until frost to control both larvae and adult ticks. Also,
treat pets with a product registered for flea and tick control. See
Outdoor Surfaces Use.
Cluster Flies
Apply in late summer or early fall before flies are observed alighting on surfaces. Apply thoroughly
on siding, under eaves, and around windows and doors, paying particular attention to
south-facing surfaces. Apply just enough dilution to adequately cover the area without excessive
dripping or runoff. Volume can vary depending on the surface type treated. Heavy precipitation
prior to frost may require retreatments to maintain protection. In winter and spring when flies
become active and are emerging, interior crack and crevice and void treatments can help reduce
the infestation, along with ULV or general surface application in infested attics or unoccupied
lofts.
Litter Beetles (Darkling, Hide, and Carrion Beetles) and Flies In Animal
Housing (Such As Poultry Houses)
To control adult litter beetles, apply EXILE™ CS insecticide to walls and floors at cleanout,
before reintroduction of animals. This will suppress beetles that escaped earlier treatment and
will help delay onset of future infestations. Pay attention to areas where beetles frequently
occur, such as walls, supports, cages, stalls, and around feeders. To help control flies, apply a
directed application to horizontal surfaces and overhead areas and allow to dry before reintroduction
of animals; also see
Livestock/Poultry Housing Structures and Pet Kennels.
Application Within Food Handling Establishments
(places other than private residences
in which exposed food is held, processed, prepared, or served) including, but not limited to,
areas for receiving, storage, packing (canning, bottling, wrapping, boxing), preparing foods,
edible waste storage and enclosed processing systems (mills, dairies, edible oils, syrups), and
serving areas.
Use as a crack and crevice or spot treatment in and around both food and nonfood areas. Apply
in small amounts directly into cracks and crevices, using equipment capable of delivering a pin
stream of insecticide, in points between different elements of construction, between equipment
and floor, openings leading to voids and hollow spaces in walls, equipment and bases. Food contact
surfaces and equipment should be cleaned with an effective cleaning compound and rinsed
with potable water before using.
Limit individual spot treatments to an area no larger than 20% of the treated surface. Individual
spot treatments should not exceed 2 sq. ft. Take extreme care that the product is not introduced
into the air. Avoid contamination of food and food processing surfaces.
Application Within Food Serving Areas (facilities where foods are served,
such as dining rooms)
Apply as a crack and crevice or spot treatment to selective surfaces such as baseboards, under
elements of construction, and into cracks and crevices. Avoid treating surfaces likely to be contacted
by food. (Do not apply when facility is in operation or foods are exposed.) Food must be
covered or removed in area being treated. Do not apply directly to food or allow applications to
contaminate food.
Application of this product in the Food Areas and/or Food Serving Areas of Food Handling
Establishments other than as a spot and/or crack and crevice treatment is not permitted. Use of
application equipment such as the Micro-Injector or Actisol applicator in food areas should be
limited to crack and crevice treatment only.
Livestock/Poultry Housing Structures and Pet Kennels
Apply as a general surface (including directed sprays) and/or crack and crevice treatment.
Control is enhanced when interior and exterior perimeter applications are made in and around
the livestock, poultry, and pet housing structures. Normal cleaning practices of the structure also
must be followed along with applications of EXILE™ CS insecticide to effectively control the
crawling and flying insect pests listed in the table.
unoccupied areas of livestock barns or housing structures, apply to floors, vertical, and overhead
surfaces where crawling or flying insect pests are or may be present. Feeders, waterers, and
feed carts should be covered before application to prevent contamination. Do not apply to milk
rooms or feed rooms. Pay attention to animal areas including stanchions, pipes, windows and
doors, and areas where insect pests hide or congregate. Exterior applications to south facing
walls and foundation perimeters can help prevent interior infestations of flying and crawling
insect pests.
For poultry houses, apply to floor area (birds grown on litter) or to walls, posts, and cage framing
(birds grown in cages). Application should also be made into cracks and crevices around
insulation. Reapply after each growout or sanitization procedure. Indoor control can be
enhanced by making perimeter treatments around the outside of building foundations to prevent
immigrating adult beetles. Apply in a uniform band 1–3 ft. up and 2–6 ft. out from foundation.
Maintaining a year-round treatment program will prevent background populations from
reaching problem levels.
Do not make interior applications of EXILE™ CS insecticide in areas of facility where animals
other than cattle or calves are present. Allow treated surfaces to completely dry before restocking
the facility.
DO NOT
make applications to any animal feedstuffs, water, or watering equipment.
DO NOT
contaminate any animal food, feed, or water in and around livestock, poultry, or pet
housing when making applications.
Outdoor Surfaces Use
For control of ants, bees, centipedes, cockroaches, crickets, fleas, flies, millipedes, mosquitoes,
scorpions, sowbugs, pillbugs, spiders, termites (above ground only), ticks, wasps, and other
similar perimeter arthropod pests. Apply with either hand or power application equipment as a
residual treatment to ornamental plants next to foundations of buildings and to surfaces of
buildings, porches, screens, window frames, eaves, patios, garages, refuse dumps, and other
similar areas where these insect pests are active. For termites, this type of application is not
intended as a substitute for soil treatment labeled termiticides or mechanical alteration to control
subterranean termites, or fumigation for extensive infestation of drywood termites or other
wood-infesting insects. The purpose of such applications of EXILE™ CS insecticide for termites
is to kill workers or winged reproductive forms which may be present in treated channels at the
time of treatment. Such applications are not a substitute for mechanical alteration, soil treatment
or foundation treatment, but are merely a supplement. This product is not recommended
as sole protection against termites. For active termite infestations, get a professional inspection.
Structural Perimeter Barrier Treatments
Applying a continual band of insecticide around a building foundation and around windows,
doors, service line entrances, eaves, vents, and other areas can greatly reduce the potential for
entry by crawling pests. To facilitate application, remove debris and leaf litter from next to the
foundation, cut back vegetation and branches that touch the foundation, and move or rake back
rocks, deep mulch, or other potential pest harborage next to the foundation. Apply the band up
to 10 ft. wide around the structure (or according to state regulations governing commercial pest
control) and upwards along the foundation to 3 ft. and around windows, doors, and roof overhangs.
Apply as a coarse spray to thoroughly and uniformly wet the foundation and/or band area
so that the insecticide will reach the soil or thatch level where pests may be active.
Amount of concentrate is dependent upon pest species (see pest table and comments), infestation
levels, and service interval desired.
Rate Table For Structural Perimeter Barrier Applications
Application Rate:
Fl. oz. (mL) of Area of Coverage
EXILE™ CS insecticide Gals. of Water
1 (sq. ft.)
0.2 fl. oz. (6mL) 1–5 gals. 800–1600 sq. ft.
0.4 fl. oz. (12 mL) 1–5 gals. 800–1600 sq. ft.
0.8 fl. oz. (24 mL) 1–5 gals. 800–1600 sq. ft.
1
Application volume may be greater than 5 gals./800–1600 sq. ft. if required under heavy
vegetative or landscaping materials in order to obtain desired coverage.
Examples of Dilutions For Structural Perimeter Barrier Applications
Application Rate Fl. oz. (mL) of EXILE™ CS insecticide to
Application Fl. oz. (mL) of Dilute in Water According to
Volume EXILE™ CS Spray Tank Volumes
Gals. of Solution/ insecticide/
1000 sq. ft. 1000 sq. ft. 5 gals. 10 gals. 50 gals.
1 gal./1000 sq. ft. 0.2 fl. oz. (6mL) 1 fl. oz. (30 mL) 2 fl. oz. (60 mL) 10 fl. oz. (300mL)
0.4 fl. oz. (12 mL) 2 fl. oz. (60 mL) 4 fl. oz. (120mL) 20 fl. oz. (600 mL)
0.8 fl. oz. (24 mL) 4 fl. oz. (120mL) 8 fl. oz. (240mL) 40 fl. oz.(1200mL)
2 gal./1000 sq. ft. 0.2 fl. oz. (6mL) 0.5 fl. oz. (15 mL) 1 fl. oz. (30 mL) 5 fl. oz. (150 mL)
0.4 fl. oz. (12 mL) 1 fl. oz. (30 mL) 2 fl. oz. (60 mL) 10 fl. oz. (300 mL)
0.8 fl. oz. (24 mL) 2 fl. oz. (60 mL) 4 fl. oz. (120 mL) 20 fl. oz. (600 mL)
5 gal./1000 sq. ft. 0.2 fl. oz. (6mL) 0.2 fl. oz. (6 mL) 0.4 fl. oz. (12 mL) 2 fl. oz. (60 mL)
0.4 fl. oz. (12 mL) 0.4 fl. oz. (12 mL) 0.8 fl. oz. (24 mL) 4 fl. oz. (120 mL)
0.8 fl. oz. (24 mL) 0.8 fl. oz. (24 mL) 1.6 fl. oz. (48 mL) 8 fl. oz. (240 mL)
Example calculation: to apply the mid-rate of EXILE™ CS insecticide at a volume of 5 gal./1000
sq. ft., mix 4 fl. oz. of concentrate in 50 gallons of water.
The percent active ingredient in the finished EXILE™ CS insecticide dilution can be calculated
with the following formula:
mL needed to add times 9.7% active in concentrate, divided by gal. finished dilution times
3785 mL/gal. = % active in dilution. (Example: 4 fl. oz. in 50 gal. is 120 mL, times 9.7 equals
1164, and 50 gal. times 3785 is 189250. Dividing 1164 by 189250 equals 0.006% active in
the tank dilution).
You have 0 item(s) 
