Prima 12.5 ml Injector. With the same rugged construction of the vaccinator, this two-stage rear hose connector can also be used as a low-dose drencher.

American Livestock Supply, Inc. has taken great care in assembling this label information. But, due to the possibility of human error or manufacture label changes, American Livestock Supply, Inc. disclaims responsibility for use or misuse of this product. Before use, always read and follow the manufacturer's label on the physical product.



: 87027 PRIMA INJECTOR with large draw-off

DESCRIPTION: Injector from 1 to 12.5 cc (from 1 , 1.5, 2, 2.5, 3, 3.5, 4, 4.5 ECT) marked in the dose window on the top of the gun, adjust by simply turning the dose adjuster.

DIRECTIONS: FITTING THE NEEDLE : 1- Unscrew cap until flush with nozzle. 2- Slot needle in. 3- Screw down cap. PRIMING: 1- Set dose at 12.5ml and pump injector until fluid begins to fill the barrel. 2- Hold applicator vertical, flick barrel until bubble is centered then carefully squeeze until bubble disappears. SET DOSE: CLEANING AND LUBRICATION: 1- after use, flush the applicator with hot soapy water, rinse. 2- Unscrew barrel. 3- Lubricate piston o'ring with olive or cooking oil and replace barrel. Cleanings for current liquid -will refill automatically

CAUTION: DO NOT REMOVE O RING

QUESTIONS OR COMMENTS: \tPRIMA TECH USA PO BOX 336, KENANSVILLE NC, 28349 PHONE: 910-296-6116 FAX: 910-296-0306 TOLL FREE 888-833-7099 (USA& CANADA) WWW.PRIMATECHUSA.COM

Other product information: The Injector barrel with o ring, is 3 1/4 inches long made of clear plastic, the needle nut fits at the end of the barrel and is blue, and 1 1/8 inches long , The clear tubing is 48 inches long. The overall from the needle nut to the end of the dose adjuster ( which sticks out past the handle is 8 1/4 inches long.
Note: The large draw off fits 250-1000 bottles with a 30 mm neck the small draw off fits 50-100 ml bottles with 20mm neck