#DPH15 - The drain plug de-icer is designed for use in Rubbermaid Stock Tanks only. It easily attaches in the drain plug assembly and is thermostatically controlled for efficiency. There is no cord in the water and goes unnoticed by livestock. One year warranty. #DPH15 is recommended for the 100, 150 or 300 gallon stock tank.

American Livestock Supply, Inc. has taken great care in assembling this label information. But, due to the possibility of human error or manufacture label changes, American Livestock Supply, Inc. disclaims responsibility for use or misuse of this product. Before use, always read and follow the manufacturer's label on the physical product.

DEICEDPH15. DRAIN PLUG DE-ICER. MODEL DPH-15

DESCRIPTION: 1500 Watts. 120 VAC. HL One unit fits all tanks. Designed for use in all Rubbermaid Stock tanks. Install in minutes without tools. See instructions. Converts easily for use in other manufactured stock tanks. Thermostatically controlled for efficiency. Unnoticed by livestock: no cord in the water. Field tested to -20degrees F (-28degreesC). One year warranty. Made in USA.

DIRECTIONS: Rubbermaid Installation Instructions. 1. Unscrew plastic nut on outside of tank. Remove entire drain plug assembly. Save washers and nut. Place one washer over cord to housing. 2. Insert De-Icer from the inside of tank. Cord feeds through hole, then through second washer and nut. 3. Secure De-Icer to tank with nut. Be sure to use both washers. Other Manufacturers' Installation Instructions. 1. Drill out a 2" hole approximately 3" from the bottom, as illustrated. 2. Place one washer over cord to housing. Insert De-Icer from inside of tank. Cord feeds through 2" hole, then through second washer and nut. 3. Secure De-Icer to tank with nut. Be sure to use both washers.

WARNINGS: Not responsible for consumer workmanship.

QUESTIONS OR COMMENTS: Farm Innovators. 2255 Walter Glaub Dr. Plymouth, IN 46563 219-936-5096.